4 minute read

Why this post

Link Shell Extension (LSE), by Hermann Schinagl, adds right-click commands to Windows Explorer for making junctions, hardlinks and symbolic links. It’s free, and it’s still the easiest way to do this in Explorer. Nothing built into Windows does the same job.

Is it still current? The latest stable release is 3.9.3.5. The author’s page lists a version 4.0 as in progress, but there’s been no new stable release in a few years. The old version still installs and works on Windows 11. You just have to know where Windows 11 hides its menu items, which is covered below.

This post replaces my two earlier LSE posts (the install guide and the troubleshooting guide) with one updated version.


The three link types

  Junction Symbolic link Hardlink
Works on Folders only Files or folders Files only
Across drives Yes, local drives only Yes, including network shares No, same drive only
Needs admin No Yes, unless Developer Mode is on No
If the target is deleted Link breaks Link breaks File survives (it’s the same file)
Typical use Move a big folder to another drive and leave a “pointer” behind Same as junction, plus files and network paths Same file in two places with no extra disk space

Rule of thumb: to move a folder like C:\Users\You\Games to D:\ without breaking programs, use a junction.

All three need NTFS. They don’t work on FAT32 or exFAT drives, which most USB sticks use.


Install

  1. Download from the official page: https://schinagl.priv.at/nt/hardlinkshellext/linkshellextension.html Pick the installer for your PC. On almost every Windows 11 PC that’s the 64-bit one (HardLinkShellExt_X64.exe). Use the ARM64 build on Snapdragon or ARM laptops.

    Or install with winget:

    winget install -e --id HermannSchinagl.LinkShellExtension
    
  2. Run it from a local folder like Downloads, not from OneDrive, a network share, or a synced folder.
  3. If Windows blocks it, right-click > Properties > check Unblock > OK.
  4. Run the installer. It checks for the Microsoft Visual C++ runtime and installs it if it’s missing.
  5. The installer restarts Explorer, so your taskbar and open Explorer windows will blink. That’s normal.

Make a junction with LSE

  1. Right-click the target folder (the real folder, e.g. D:\Games) and choose Pick Link Source.
  2. Go to where you want the link (e.g. C:\Users\You), right-click an empty spot, and choose Drop As > Junction.

On Windows 11, these commands aren’t on the short right-click menu. Click Show more options at the bottom, or hold Shift while you right-click.

Other choices under Drop As:

  • Hardlink: files only, same drive only
  • Symbolic Link: files or folders, any drive
  • Smart Copy / Smart Mirror / Clone: copies a folder tree and keeps any links inside it intact

Check that it worked

  • A junction or link shows a small chain icon on the folder.
  • Right-click it > Properties > Link Properties tab shows the target, with an Explore Target button.
  • A broken junction (target deleted or drive missing) may not show the Link Properties tab at all.

Moving a folder to another drive

This is the most common reason to use a junction.

  1. Close any program that uses the folder.
  2. Move the folder: C:\Users\You\Games to D:\Games.
  3. Right-click D:\Games > Pick Link Source.
  4. Right-click in C:\Users\You > Drop As > Junction.

Programs still see C:\Users\You\Games, but the files live on D:.


Built-in commands (no install needed)

For a one-off link or a script, Windows can do it without LSE.

Command Prompt:

mklink /J "C:\Users\You\Games" "D:\Games"

Use /D instead of /J for a folder symlink, /H for a hardlink, or no switch for a file symlink.

PowerShell:

New-Item -ItemType Junction -Path "C:\Users\You\Games" -Target "D:\Games"

List junctions and links in a folder and its subfolders:

dir /AL /S C:\Users\You

Removing a junction safely

Removing a junction should only remove the link, not the files in the target. Use one of these:

rmdir "C:\Users\You\Games"
(Get-Item "C:\Users\You\Games").Delete()

Don’t use Remove-Item -Recurse or del /s on a junction. Some versions of Windows and PowerShell follow the link and delete the files in the target.


Symlinks without admin: Developer Mode

Junctions and hardlinks don’t need admin rights. Symbolic links do, unless you turn on Developer Mode:

Settings > System > Advanced > For developers > Developer Mode: On

On older Windows 11 builds it’s under Settings > Privacy & security > For developers.

With Developer Mode on, LSE and mklink /D make symlinks without a UAC prompt. You don’t need this for junctions.


Troubleshooting

Problem Fix
No LSE items on the right-click menu Click Show more options, or Shift + right-click
Still no items after installing Restart Explorer: Task Manager > Windows Explorer > Restart, or sign out and back in
Menu never appears Wrong build installed. Uninstall it and install the x64 one (ARM64 on ARM PCs)
Installer won’t run or does nothing Copy it to a local folder (not OneDrive), Unblock it in Properties, and check whether antivirus quarantined it
Upgrade fails or acts strangely Uninstall the old version in Settings > Apps > Installed apps, restart, then reinstall
Drop As options greyed out The drive isn’t NTFS (FAT32/exFAT), or you’re trying to hardlink across drives. LSE’s ln --probefs X: shows a drive’s file system
Symlink fails with “privilege not held” Run as admin, or turn on Developer Mode
Junction to a network share fails Junctions only work with local drives. Use a symbolic link instead

Which to use

  • LSE: occasional work in Explorer, and the chain icons show which folders are links.
  • mklink or PowerShell: one-off jobs on a PC without LSE, or anything you’ll script or repeat.
  • Junction for folders on local drives, symlink for files or network paths, hardlink for one file in two places on the same drive.